3Com S200 manual Call Control

PAD Port Configuration

Call Control

Range:	NONE, AUTO, AUTC, PCUD, IBAR, OBAR, MNEM, TMNEM
Default:	NONE
Description:	Specifies PAD behavior and limitations when making and
		receiving calls:
			• NONE: No options
			• AUTO: Automatically places a call when an EIA connection
			is established
			• AUTC: Automatically places a call when <CR> is received
			• PCUD: Pass Call User Data (CUD) to user profile for no
			service signals
			• IBAR: Bar calls inbound from PAD user
			• OBAR: Bar calls outbound to PAD user
			• MNEM: Place only mnemonic calls
			• TMNEM: Call mnemonic (maximum 16 alphanumeric
			characters) that is not resolved in the local node. This option
			cannot be summed with any of the above options.
		If you sum AUTO+IBAR+PCUD:
			• Automatic calling is in effect.
			• Call User Data passes from the user with no service signals.
			• Incoming calls are not accepted by that user.
			Note
		Do not sum IBAR and OBAR because, when combined, they
		render the port useless.

Configuring PAD/ATPAD Ports 11