3Com S200 manual #2, Echo, #3, Data Forwarding Character, #4, Idle Timer Delay

PAD Profile Table Record

#2, Echo

Range:	0, 1
Default:	1
Description:	Controls echo:
	• 0: Echo disabled
	• 1: Echo enabled
	Setting to 0 (disabled) causes parameter #20 Echo Mask to be
	ignored.

#3, Data Forwarding Character

Range:	0 to 127
Default:	2
Description:	Specifies the ASCII characters used for data forwarding:
			• 0: No data forwarding cha racters.
			• 1: A-Z, a-z, 0-9.
			• 2: <CR>.
			• 4: <ESC>, <BEL>, <ENQ>, <ACK>.
			• 8: <DEL>, <CAN>, <DC2>.
			• 16: <EOT>, <ETX>.
			• 32: <HT>, <LF>, <VT>, <FF>.
			• 64: All ch aracters in columns 0 and 1 of Appendix A, ASCII
			Table, not mentioned above.
			Note
		Combine several parameter values by summing:
		Example: 6 = 2 (<CR>) + 4 (<ESC>, <BEL>, <ENQ>, and
		<ACK>.
		This includes all of selection 2 and selection 4.

#4, Idle Timer Delay

Range:	0 to 255
Default:	0
Description:	Selects forwarding idle timer delay that determines when data is
		sent to the network.
			• 1 to 255: Value of idle timer in 1/20 seconds.
			• 0: disables the idle timer.
			Note
		Functional only if parameter #15, Editing, is set to 0.

30 Configuring PAD/ATPAD Ports