3Com S200 manual #7, Break Signal Operation, #9, Padding After Carriage Return, #10, Line Folding

PAD Profile Table Record

#7, Break Signal Operation

Range:	0, 1, 2, 4, 5, 8, 21
Default:	2
Description:	Selects the PAD mode of operation when a break signal from the
	attached device is received:
	• 0: Do nothing.
	• 1: Send Interrupt packet.
	• 2: Send Reset packet
	• 4: Send Indication of Break packet.
	• 5: Send Interrupt packet and Indication of Break packet.
	• 8: Escape from data transfer state; return to Command Mode.
	• 21: Discard output; send Int errupt packet and Indication of
	Break packet.
#9, Padding After Carriage Return
Range:	0 to 255
Default:	0
Description:	Controls padding after <CR>:
	• 0: No padding after <CR>. Use this when sending to a CRT.
	• 1 to 255: The number of padding characters inserted after
	<CR>
	Select at least one padding character. When the data is sent to a
	printer, the padding characters interrupt the data stream until the
	print head is ready for the next line of text.

#10, Line Folding

Range:	0 to 255
Default:	0
Description:	Controls line folding:
	• 0: No line folding
	• 1 to 255: Number of characters per line

32 Configuring PAD/ATPAD Ports