3Com S200 manual Use Connection Type, Port Control

PAD Port Configuration

Use Connection Type				When... (continued)
DIMO				A crossover cable attaches a dial modem to the port,
				and whose handshake uses modem control signals as
				calls are made. Types of DIMO operation are:
				• Dial In: Calls received from the tele phone
				network.
				• Dial Out: Calls received from the port.
				• Dial In/Dial Out Collision: Calls received
				simultaneously from the telephone network and
				the port.
DIMOa				Same as DIMO but DSR is never raised on incoming
				call.
DIMOb				Same as DIMO but DSR follows DTR on incoming
				calls.
EMRI				A port connects to a host computer and replaces a
				modem. The port emulates a dial modem with Ring
				Indicator (RI).
EMDC				A port connects to a host computer and replaces a
				modem. The port emulates a dial modem with Data
				Carrier Detect (DCD) used to signal an incoming
				call.
EMCDIO				A port connects to an asynchronous host computer
				and emulates a modem with DCD for incoming and
				outgoing calls.
Port Control
Range:	NONE, MB
Default:	NONE
Description:	MB enables the make-busy feature for the specified port; disabling
		the port raises pin 22 only when Connection Type = DIMO,
		DIMOa, DIMOb, DTR, DTRD, or SIMP.
			Note
		NONE (disables the Make Busy feature)

8 Configuring PAD/ATPAD Ports