3Com S200 manual Terminal Control

PAD Port Configuration

Terminal Control

Range:	NONE, PASS, LIM, CUG, LCPY, 7BIT, NADD, X.28, CNUI,
		CUGOA, BMSG, ADDR, FRCB, CUGIA
Default:	NONE
Description:	Specifies options for the attached device:
			• NONE: No option specified
			• PASS: A password is required (configured in the NUI/
			Password Table).
			• LIM: X.28 mode is limited to CALL and CLR commands.
			• CUG: Check Closed User Group (CUG); otherwise the CUG
			passes transparently.
			• LCPY: Allow local copying to this PAD port
			• 7BIT: Allows an internal 7-bit representation of characters to
			determine if extra processing is needed.
			– Example: The line delete character is hexadecimal value
			18, and the input character received by the PAD is
			hexadecimal 98. If 7BIT is not selected, the current input
			line is not deleted. If 7BIT is selected, the input line is
			deleted as the internal representation of the character would
			only be 7 bits.
			• NADD: Prevents PAD port from receiving calling address and
			facility’s service signals
			• X28: Automatically returns from X.28 mode to PAD mode
			after sending the X.28 commands
			• CNUI: Provides Centralized Network User Identification
			verification.
			• CUGOA: Subscribe to Closed User Group with Outgoing
			Access.
			• BMSG: Displays the PAD Bulletin/Banner Message.
			• ADDR: The calling address is not shown.
			• FRCB: Connects to a French Cartes Bancaires (banking card)
			device.
			• CUGIA: Checks the CUG but allows incoming access;
			otherwise CUG data is passed transparently.
			Note
			Use summing to combine several parameter values. CUGOA
			and CUG or CUG and CUGIA cannot be used together.

12 Configuring PAD/ATPAD Ports