3Com S200 #111, Echo Control, #112, Dynamic Data Forwarding, #113, Hewlett-Packard Flow Control

PAD Profile Table Record

#111, Echo Control

Range:	0 to 3
Default:	0
Description:	Specifies how the PAD handles echoing of data when #2 Echo = 1:
			• 0: No Priority. Data is output, and cha racters are echoed as
			they arrive.
			• 1: Input Priority. PAD holds output until input from the
			terminal is finished.
			• 2: Output Priority. PAD echoes input after output.
			• 3: Formatted Screen. PAD echoes one block of data for each
			packet sent from the host and assumes that the packet will
			reformat the screen or move cursor to the next field.
			Note
		Disabled when #2 Echo = 0

#112, Dynamic Data Forwarding

Range:	0, 1
Default:	0
Description:	Determines if the PAD dynamically forwards data packets as
		bandwidth becomes available on the network link:
			• 0: Dynamic Data Forwarding OFF
			• 1: Dynamic Data Forwarding ON
			Note
		When enabled, parameters 1, 2, 3, 4, 7, 15, 16, 17, 18, 20, 100,
		101, 102, 106, 108, 110, 111, and 113 are ignored.

#113, Hewlett-Packard Flow Control

Range:	0 to 4
Default:	0
Description:	Controls Hewlett-Packard Flow Control:
	• 0: No HP flow control
	• 1: HP host ENQ/ack control
	• 2: HP terminal ENQ/ack control
	• 3: HP host XON/XOFF control
	• 4: HP terminal XON/XOFF control

Configuring PAD/ATPAD Ports 41