3Com S200 manual PAD Profile Table Record, Introduction What You See In This Record

PAD Profile Table Record

PAD Profile Table Record

Introduction

What You See In This Record

The PAD Profile Table Record specifies the profile for a single PAD Port, in the local node. Many other PAD ports can also use the same PAD Profile Table Record to ensure that all PAD Ports have the same characteristics. You can configure up to 16 PAD profiles.

Figure 7 shows how the PAD Profile Table Record and its configuration parameters fit into the PathBuilder S200 series switch menu hierarchy.

Node:	Address:)
Menu: Configure	Path: (Main.6)

Node

Port

•

•

•

PAD Profile Table

Entry Number

Profile Name

#1, PAD Recall

#2, Echo

#3, Data Forwarding Character

#4, Idle Timer Delay

#5, Device Flow Control

#6, Service Signals Control

#7, Break Signal Operation

#9, Padding After Carriage Return

#10, Line Folding

#12, PAD Data Restraint

#13, Linefeed Insertion After CR

#14, Padding After LF

#15, Editing

#16, Character Delete

#17, Line Delete

#18, Line Display

#19, Editing Type

#20, Echo Mask

#21, Parity Treatment

Date:Time:

#22, Page Wait

#100, Break Character

#101, Echo Substitution Toggle Character #102, Echo Substitution Character #103, XON Character

#104, XOFF Character

#105, Control Signal (EIA-232-D) Data Restraint #106, Network Parity

#107, Idle Disconnect Timer

#108, Disconnect Character

#109, Form Feed Padding

#110, Esc Forwarding Delay Handling #111, Echo Control

#112, Dynamic Data Forwarding #113, Hewlett-Packard Flow Control #114, PAD Mode (Polled Async Only)

#115, Data Forwarding Criteria (Polled Async Only) #116, Short Timer Duration (Polled Async Only) #117, EIA Signalling Action (Polled Async Only) #118, Message Assembly (Polled Async Only) #119, DCD to Data Timer Duration

Figure 7. PAD Profile Table Record

Before You Begin Before you can configure parameters, you must log on to the local node’s control terminal port. Refer to the Configuration Basics Guide for CTP procedures.

Configuring PAD/ATPAD Ports 27