3Com S200 manual #1 Parameter Number continued, #1 Parameter Value, Example

Remote PAD Parameter Table Record

#1 Parameter Number (continued)

•#108: Disconnect Character (0 to 127)

•#109: Form Feed Padding (0 to 255)

•#110: Esc Forwarding Delay Handling (0 to 255)

•#111: Echo Control (0 to 3)

•#112: Dynamic Data Forwarding (0, 1)

•#113: Hewlett -Packard flow control (0 to 4)

•#114: PAD Mode (0 to 2)

•#115: Data Forwarding Criteria (0 to 2)

•#116: Short Timer Duration (0 to 255)

•#117: EIA Signalling Action (0, 1)

•#118: Message Assembly (0, 1)

•#119: DCD to Data Timer Duration (0 to 255)

Note

If you enter 0 (zero), the entry is ignored.

#1 Parameter Value

Range:	0 to 255
Default:	0
Description:	Specifies the X.3 parameter value (in the PAD Profile Table) sent
	to the remote PAD when connection is made.
	Entering an incorrect value for a particular parameter causes the
	value to be ignored.
	Example:
	Step 1: Set the Parameter Value (or press <CR>).
	Result: The next Parameter Number appears, followed by the next
	Parameter Value.
	Step 2: Set a parameter value for #1 Parameter Number and #1
	Parameter Value.
	Result: #2 Parameter Number and then #2 Parameter Value appear.
	The sequence repeats until you enter one of these occur:
	• A Parameter Number and Parameter Value for each parameter
	listed in the PAD profile table
	• <;> to implement the values
	<ESC> to abort the process

52 Configuring PAD/ATPAD Ports