3Com S200 manual #20, Echo Mask, #21 Parity Treatment

PAD Profile Table Record

#20, Echo Mask

Range:	0 to 255
Default:	1+2+4+8+16+32+64+128
Description:	Specifies the echo mask (which characters are not echoed):
			• 0: No echo mask (all characters echoed).
			• 1: No echo of <CR>.
			• 2: No echo of line feed <LF>.
			• 4: No echo of <VT>, <HT>, or <FF>.
			• 8: No echo of <BEL> or <BS>.
			• 16: No echo of <ESC> or <ENQ>.
			• 32: No echo of <ACK>, <NAK>, <STX>, <SOH>, <EOT>,
			<ETB>, or <ETX>.
			• 64: No echo of editing characters as designated by parameters
			#16, #17, and #18.
			• 128: No echo of all characters in columns 0 and 1 of the
			ASCII table not mentioned above, and <DEL>.
			Note
		Combine several parameter values by summing:
		Example: 3 = 2 (no echo of line feed) + 1 (No echo of <CR>).
		If parameter #2 Echo = 0 (disabled), parameter #20 Echo Mask is
		ignored.

#21 Parity Treatment

Range:	0 to 7
Default:	7
Description:	Specifies how parity is treated on characters to and from the
		attached device:
			• 0: No parity checking or gen eration
			• 1: Parity checked in received characters
			• 2: Parity generated in transmitted characters
			• 4: Parity stripped from received characters
			Note
		Combine several parameter values by summing:
			– Example: 3 = 2 (parity generated in transmitted character) +
			1 (parity checked on received characters)

36 Configuring PAD/ATPAD Ports