3Com S200 manual #14, Padding after LF, #15, Editing, #16, Character Delete, #17, Line Delete

PAD Profile Table Record

#14, Padding after LF

Range:				0 to 255
Default:				0
Description:				Controls padding after <LF> in Data
				Mode:
				• 0: No padding after <LF>
				• 1 to 255: The number of padding
				characters inserted after <LF>
				Select at least one padding character
				when a printer receives data, as the
				padding characters interrupt the data
				stream until the print head is ready for
				the next line of text.
#15, Editing
Range:	0, 1
Default:	1
Description:			• 0: No editing
			• 1: Allow editing
			Note
		If set to 1, parameter #4, Idle Timer Delay must be 0. If set to 0,
		parameters #16 Character Delete, #17 Line Delete, and #18 Line
		Display are disabled.

#16, Character Delete

Range:	0 to 127
Default:	8 (backspace or <CNTRL>H)
Description:	Specifies the decimal value of the ASCII character used to delete a
	character when #15 Editing = 1.
#17, Line Delete
Range:	0 to 127
Default:	24 (<CNTRL>X)
Description:	Specifies the decimal value of the ASCII character used to delete a
	line (when #15 Editing = 1)

34 Configuring PAD/ATPAD Ports