3Com S200 manual Data Summary IN/OUT

Detailed PAD Port Statistics

Screen Term	Tells You... (continued)
Data Summary: IN/OUT	Summary of the characters, packets, and
	frames being sent and received over the port
EIA Summary	Summary of the EIA control signals being
	sent and received over the port
	Possible states are:
	• NULL
	• Connected (SIMPLE)
	• Idle, Connected (DTR), Wait For Clear
	(DTR), Wait for DTR (DTR)
	• Idle (DTRP), Call Detected (DTRP),
	Connected (DTRP)
	• Idle, Call Detected (DIMO), Incoming
	Call Detected (DIMO), Connected
	(DIMO), Clear Confirm (DIMO)
	• Idle, RI On (EMRI), RI Off (EMRI),
	Wait for RTS (EMRI), Connected
	(EMRI), Wait for DTR (EMRI)

What You See in Figure 10 shows the second screen of the Detailed PAD Port Statistics. the Second Screen

Node:	Address:	Date:	Time:
Detailed PAD Statistics: Port 3			Page: 2 of 3

Call Summary:

Current Status: Disconnected

Time until next auto-call attempt: 0 secs

Number of auto-call attempts: 0

Last clear cause code: 0 (Cleared by other end)

Last clear diagnostic code: 0 (No more information)

Last Inbound Call:

Called Address:

Calling Address:

Facilities:

CUD:

Last Outbound Call:

Called Address:

Calling Address:

Facilities:

CUD:

Press any key to continue (ESC to exit)...

Figure 10. Example of Detailed PAD Port Statistics, Second Screen

54 Configuring PAD/ATPAD Ports