3Com S200 manual Protection Level, Reconnection Timeout, Reconnection Tries Limit

PAD Port Configuration

*Protection Level

Range:	NONE, CP_ONLY, FULL_DCP
Default:	NONE
Description:	Specifies how Data Connection Protection is implemented for this
		port:
			• NONE: The feature is turned off.
			• CP_ONLY: Connection protection only.
			• FULL_DCP: Full data and connection protection.
		Valid only when the Data Connection Protection Option has been
		purchased for this node.
			Note
		Changes to this parameter require a Node Boot to take effect.

Reconnection Timeout

Range:	1 to 128
Default:	2
Description:	• Specifies how many seconds the Data Connection Protection
	feature waits between reconnection attempts.
	• The call originator determines the value.
	If symmetric operation is required, the Reconnection Timeout and
	the Reconnection Tries limit should be equal.
	Valid only when the Data Connection Protection Option has been
	purchased for this node.

Reconnection Tries Limit

Range:	0 to 127
Default:	4
Description:	• Specifies the number of times that the Data Connection
	Protection feature attempts to reconnect before clearing
	the call.
	• The call originator determines the value.
	If 0 is entered, there will be no attempt to reconnect. If symmetric
	operation is required, the Reconnection Timeout and the
	Reconnection Tries limit should be equal.
	Valid only when the Data Connection Protection Option has been
	purchased for this node.

16 Configuring PAD/ATPAD Ports