3Com S200 ATPAD Port Statistics, Function, Description of Terms - First Screen, Characters/sec

ATPAD Ports

	ATPAD Port Statistics
Function
		When you select Detailed ATPAD Port Statistics, a series of screens appears that
		provides information about the state and status of the ATPAD port.

What You See in Figure 14 illustrates the first screen of Detailed ATPAD Port Statistics. the First Screen

Node:		Address:			Date:			Time:
Detailed ATPAD Port Statistics: Port 3								Page: 1 of 2
Port Number: 3			Port Type: ATPAD Port				Status: Up
Port Speed: 9600							Port State: Data
Port Utilization In: 0%							Port Utilization Out: 1%
Physical Summary:
Parity Errors:	0		Overrun Errors: 0			Framing Errors: 0
Data Summary:
	IN		OUT			IN		OUT
Characters:	252		3807	Characters/sec:		0		18
Packets:	252		274		Packets/sec:	0		0
Number of Packets Queued: 0
Interface Summary: EIA-232-D DCE				INPUT		OUTPUT
		DTR	RTS	MB	P14	DSR	DCD	RI CTS
State: Connected (SIMPLE)		H	H	H	L	L	H	H L

Press any key to continue (ESC to exit)...

Description of

Terms — First

Screen

Figure 14. ATPAD Port Statistics - Screen 1

The first Detailed ATPAD Port Statistics screen contains this information:

Screen Term	Tells You...
Port Number	Number of the port
Port Type	Type of port: ATPAD
Port Status	Status of the port: Up
Port Speed	The configured port speed
Port State	These are the possible states:
	• ATPAD: The port is in Command mode
	• PAD: The port is in Data mode
Port Utilization: IN/OUT	Percentage of port bandwidth being used
Physical Summary	Number of Parity, Overrun, and Framing
	errors since the last reset

70 Configuring PAD/ATPAD Ports