3Com S200 manual PAD Profile Table Record Parameters, #1, PAD Recall, Introduction, Entry Number

		PAD Profile Table Record
PAD Profile Table Record Parameters
Introduction
	This section describes the PAD Profile Record parameters.
Parameters
	From the PAD Profile Table Record, you can configure these parameters (with the
	exception of Entry Number):
	Entry Number
	Range:	1 to 16
	Default:	1
	Description:	Identifies the Pad Profile Table entry being configured by the other
		parameters in the record. This parameter is not configurable.
	Profile Name
	Range:	0 to 8 alphanumeric characters
	Default:	0
	Description:	Used by the parameter Profile Name in the PAD Port Record to
		select this particular PAD Profile Table Record entry. Use the
		space bar to blank the parameter value.
	#1, PAD Recall
	Range:	0, 1, 32 to 126
	Default:	1
	Description:	Identifies the character that can be entered during Data Mode to
		switch the terminal to Command Mode:
		• 0: PAD recall disable
		• 1: PAD recall character (DLE or <CNTRL>P)
		• 32 to 126: Decimal value of ASCII character used for PAD
		recall

Configuring PAD/ATPAD Ports 29