Chapter 1 Workflow
>1.1 When the Multipath Driver is not Used
Install the Fibre Channel Card Driver
Install the appropriate driver for the Fibre Channel card being used.
Applicable manual varies according to the server, OS, and Fibre Channel Card type being used. Select from the following list.
Refer
-"Chapter 7 Installing and Setting Up the Drivers" (page 28)
-Mount cards, install drivers, and perform setup.
•"Driver Settings for PRIMERGY/PRIMEQUEST 1000 Series"
-Mount cards, install drivers, and perform setup.
•"Driver Settings for PRIMEQUEST 500/400 Series"
-Mount cards, install drivers, and perform setup.
•"Driver Settings for Red Hat Enterprise Linux on Other Brand Servers with Emulex Fibre Channel Cards"
-Mount cards, install drivers, and perform setup.
•"Driver Settings for Red Hat Enterprise Linux on Other Brand Servers with QLogic Fibre Channel Cards"
-Mount cards, install drivers, and perform setup.
•"Driver Settings for SUSE Linux Enterprise Server on Other Brand Server with Emulex Fibre Channel Cards"
-Mount cards, install drivers, and perform setup.
•"Driver Settings for SUSE Linux Enterprise Server on Other Brand Servers with QLogic Fibre Channel Cards"
-Check the Fibre Channel Card driver versions.
•"Server Support Matrix"
Connect the Server to the ETERNUS DX Disk Storage Systems
Connect the server and the ETERNUS DX Disk storage systems using the Fibre Channel cables.
Refer
-"Chapter 8 Connecting the Server to the ETERNUS DX Disk Storage Systems" (page 29)
12 | Copyright 2010 FUJITSU LIMITED |
|
