Preface
The Contents and Structure of this Manual
This document is composed of the following 11 chapters and an appendix.
•Chapter 1 Workflow
This describes how to connect the ETERNUS DX Disk storage systems to a server running Linux
•Chapter 2 Checking the Server Environment
This describes which servers can be connected to ETERNUS DX Disk storage systems.
•Chapter 3 Notes
This describes issues that should be noted when connecting the ETERNUS DX Disk storage systems and server.
•Chapter 4 Installing and Setting Up the ETERNUSmgr This describes how to install ETERNUSmgr.
•Chapter 5 Setting Up the ETERNUS DX Disk Storage Systems
This describes how to use ETERNUSmgr to set up the ETERNUS DX Disk storage systems.
•Chapter 6 Setting the Fibre Channel Switches
This describes how to set up the Fibre Channel switches.
•Chapter 7 Installing and Setting Up the Drivers
This describes how to install the Fibre Channel card drivers and set up the server.
•Chapter 8 Connecting the Server to the ETERNUS DX Disk Storage Systems This describes how to connect the server and ETERNUS DX Disk storage systems.
•Chapter 9 Logical Unit Recognition
This describes how to recognize the ETERNUS DX Disk storage system logical units from server.
•Chapter 10 Setting Up and Checking the Multipath Driver
This describes how to set up and check the ETERNUS Multipath Driver.
•Chapter 11 Setting Up the File System
This describes how to create a file system on the ETERNUS DX Disk storage systems.
The restoration procedure for when a path degrades in a VERITAS Volume Manager environment is described in the appendix.
4 | Copyright 2010 FUJITSU LIMITED |
|
