Fujitsu P3AM-3842-05ENZ0 manual Install and Set Up ETERNUSmgr, Set Up the Fibre Channel Switch

Chapter 1 Workflow

>1.2 When the Multipath Driver is Used

Workflow

Install and Set Up ETERNUSmgr

Install and set up the ETERNUSmgr software (if it is to be used).

Refer

-"Chapter 4 Installing and Setting Up the ETERNUSmgr" (page 25)

-"Chapter 5 Setting Up the ETERNUS DX Disk Storage Systems" (page 26)

-Check Web GUI operation.

•"Web GUI User Guide"

-Install ETERNUSmgr.

•"ETERNUSmgr Install Guide"

-Check ETERNUSmgr operation.

•"ETERNUSmgr User Guide"

-Set up the ETERNUS DX Disk storage system.

•"ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) ETERNUS DX Disk Storage System Settings for ETERNUS DX60/DX80/DX90"

•"ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) ETERNUS DX Disk Storage System Settings for ETERNUS DX400/DX8000 series"

Set Up the Fibre Channel Switch

If a Fibre Channel switch is to be used, set it up and connect it now.

Refer

-"Chapter 6 Setting the Fibre Channel Switches" (page 27)

-Set up the Fibre Channel switch.

•"ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) Fibre Channel Switch Settings"

-Check the Fibre Channel switch connection requirements.

•"Server Support Matrix for FC-SWITCH"

P3AM-3842-05ENZ0 ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) for Linux

15 Copyright 2010 FUJITSU LIMITED