Fujitsu P3AM-3842-05ENZ0 manual Workflow, Set Up the Fibre Channel Switch

Chapter 1 Workflow

>1.1 When the Multipath Driver is not Used

Workflow

Install the ETERNUSmgr and Set Up the ETERNUS DX Disk Storage System

If the ETERNUSmgr is to be used, install it and set up the ETERNUS DX Disk storage system.

Refer

-"Chapter 4 Installing and Setting Up the ETERNUSmgr" (page 25)

-"Chapter 5 Setting Up the ETERNUS DX Disk Storage Systems" (page 26)

-Check the setup and maintenance operations.

•"Web GUI User Guide"

-Install ETERNUSmgr.

•"ETERNUSmgr Install Guide"

-Check ETERNUSmgr operation.

•"ETERNUSmgr User Guide"

-Set up the ETERNUS DX Disk storage system.

•"ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) ETERNUS DX Disk Storage System Settings for ETERNUS DX60/DX80/DX90"

•"ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) ETERNUS DX Disk Storage System Settings for ETERNUS DX400/DX8000 series"

Set Up the Fibre Channel Switch

If a Fibre Channel switch is to be used, set it up and connect it now.

Refer

-"Chapter 6 Setting the Fibre Channel Switches" (page 27)

-Set up the Fibre Channel switch.

•"ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) Fibre Channel Switch Settings"

-Check the Fibre Channel switch connection requirements.

•"Server Support Matrix for FC-SWITCH"

P3AM-3842-05ENZ0 ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) for Linux

11 Copyright 2010 FUJITSU LIMITED