Pioneer PRS-D3000SPL owner manual Specifications

Specifications

Power source	14.4 V DC (10.8 — 15.1 V allowable)
Grounding system	Negative type
Current consumption	42 A (at continuous power, 4 Ω)
Average current drawn*	8.3 A (4 Ω for one channel)
	9.0 A (2 Ω for one channel)
Fuse (external)	100 A
Dimensions	300 (W) ⋅ 64 (H) ⋅ 279 (D) mm
Weight	5.9 kg (Leads for wiring not included)
Maximum power output	1,000 W ⋅ 1 (4 Ω) / 2,000 W ⋅ 1 (2 Ω)
Continuous power output	800 W ⋅ 1 (4 Ω) / 1,400 W ⋅ 1 (2 Ω) (DIN45324, +B=14.4 V)
Load impedance	4 Ω (2 — 8 Ω allowable), (Ex. Bridge 4 — 16 Ω)
Frequency response	10 — 240 Hz (+0 dB, –1 dB)
S/N ratio	90 dB (IEC-A network)
Distortion	0.05 % (50 W, 100 Hz)
Low pass filter	Cut off frequency: 40 — 240 Hz
	Cut off slope: –24 dB/oct
Subsonic filter (HPF)	Frequency: 20 Hz
	Slope: –18 dB
Bass boost	Level: 0 — 12 dB
	Frequency: 40 — 120 Hz
Phase control	SYNC, SYNC INV
Gain control	200 mV — 6.5 V
Maximum input level / impedance	RCA: 6.5 V / 22 kΩ

Note:

•Specifications and the design are subject to possible modification without notice due to improvements.

*Average current drawn

•The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

14