Connection Diagram

Grommet

Grommet

The maximum length of the wire between the fuse and the positive

(+)terminal of the bat- tery is 45 cm.

Positive (+) terminal

Battery

Negative (–) terminal

Ground wire (sold separately)

The ground wires must be same size as the battery wire.

Connect to metal body or chassis.

Battery wire (sold separately) For the wire size, see the “Connecting the Power Terminal” section. The battery wire, the ground wire and the optional direct ground wire must be same size. After making all other connections at the amplifier, connect the bat- tery wire terminal of the amplifier to the positive (+) terminal of the battery.

ENGLISH ESPAÑOL

Grommet Fuse (100 A)

Each amplifier must be SEPARATELY fused at 100 A.

Connecting wire with RCA pin plugs (sold separately).

DEUTSCH

Optional direct ground wire (sold separately) When chassis ground- ing is not sufficient, direct grounding should be used. The wire size should be same size as the bat- tery wire.

SYNC OUTPUT / SYNC INPUT jack See the “Connecting the Speaker Wires” section for SYNC OUTPUT / SYNC INPUT jack con- nection instructions.

Car stereo with RCA output jacks

External Output (Subwoofer output)

RCA input jack

FRANÇAIS

Reverse side

Speaker terminal

See the “Connecting the Speaker Wires” section for speaker connection instruc- tions.

System remote control wire (sold separately)

 

Connect the male terminal of this wire to the system remote control terminal

 

of the car stereo (SYSTEM REMOTE CONTROL). The female terminal

 

can be connected to the auto-antenna relay control terminal. If the car stereo

 

does not have a system remote control terminal, connect the male terminal to

6

the power terminal through the ignition switch.

ITALIANO NEDERLANDS

Page 7
Image 7
Pioneer PRS-D3000SPL owner manual Connection Diagram, Grommet