Specifications
Product | Universal fit. Works with most European, | |
Application | Asian, and United States made vehicles. | |
Operating Air | 72 PSI to 110 PSI | |
Pressure | ||
| ||
Air Inlet Size | 1/4” - 18 NPT | |
|
| |
| Forged steel Disc Adapters. | |
Fabrication | Die Cast Aluminum Gun with stamped | |
| steel and machined steel. | |
| Rotates left or right to wind back pistons. | |
Additional | Magnetic pad base. | |
Features | Trigger pressure speed control. | |
| 15 Pads. |
WARNING To prevent serious injury
from accidental operation:
Disconnect the Caliper Wind Brake Tool from its compressed air supply source, and release any compressed air from the tool before performing any set up and operating procedures.
Product Features
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
FIGURE A
SLIDING BAR
(2A)
PAD | TRIGGER (6A) |
|
|
| |
|
| DIRECTION |
|
| HANDLE |
| AIR CONNECTOR (5A) | 18A) |
Product Applications
1.The following indicates which specific
Pad must be used for each vehicle make and model.
(See Figure B, next page.)
Pad 2: Citroen/XM®, Xantia® (F/R)
Pad 3: Audi®(F), FIAT/Alpha Romeo®,
Ford Fiesta® (F), ISUZU® (F),
HONDA® Concesto (F),
Jaguar® XJ6, XJ40 (F/R),
BMW® 318is, 320i, 325TD,
SKU 97456 | For technical questions, please call | Page 5 |