Using your CD player
COMPACT DISC PLAYER
CD73
24 BIT DAC
LOADPLAY STOP PAUSE
TRACK 
POWER
2 | 3 4 5 | 6 | 7 | 1 |
English
POWER 1
Press this button to switch the CD player on and off. When first powered up with no CD installed the display shows ‘No disc’.
LOAD 2
To install a CD, press LOAD (or OPEN on the remote control). The
CD tray opens – it accepts 12cm and 8cm discs. Place the CD in the | TRACK INDEX | MIN SEC |
|
| |
tray with the label facing uppermost. Press LOAD again (or press |
|
|
PLAY, or gently push the tray in 5mm) to close the tray. You will |
|
|
see the total number of tracks and total disc time. |
|
|
The display returns to ‘0’ after a few seconds. The disc is now ready to play.
PLAY 3
Press to play the CD. To restart from track 1, press STOP and then PLAY.
Make sure your amplifier’s input source selector is set to the correct input.
STOP 4
Press to stop the CD playing. The display shows ‘0’ and the number of tracks.
PAUSE 5
Press to pause the disc (interrupt play). Press PLAY to resume play from the same point.
SEARCH 6
Press 
to search backwards, or 
to search forwards for a particular passage within the currently playing track. If the player is in ‘PAUSE’ mode the search is made at high speed with the sound muted.
Press 
, 
or PLAY to stop the search action and resume playing.
SKIP TRACK 7
To start a CD with a track other than the first, press or to locate the desired track.
To select another track during play, press 
or 
. The track is played automatically after selection.
1 2 3 4 5
6 7 8
CDs with text
Load
You will see the total number of tracks and the total disc time with | TRACK INDEX | MIN |
|
| |
‘CD TEXT’ illuminated in the display. The artist and album title |
|
|
scrolls across the display before returning to show the artist and |
|
|
total number of tracks. |
|
|
Play
The track number is briefly displayed, followed by the track title scrolling across the display. The display returns to showing the track number and time.
Track selection
When a new track is selected, the track number is briefly displayed, followed by the track title scrolling across the display. The display returns to showing the track number and time.
NOTE: The track title is always displayed when a track is selected, either for playing or programming. The artist is always displayed when the disc is stopped.
SEC | 1 | 2 | 3 | 4 | 5 |
| 6 | 7 | 8 | 9 | 10 |
| 11 12 |
|
|
| |
CD TEXT |
|
|
|
|
|
CD73
5
