Putting into operation
For appliances without soft stop mechanism adjust door stop cushioning.
The door stop cushioning can be adjusted if necessary using the accompanying Allen key 5:
u For stronger spring force: turn clockwise.
u For lesser spring force
Check the following points to ensure the appliance is fitted properly. Failure to do so may lead to icing, condensate forming and malfunction:
wThe door has to close properly
wThe unit door must not butt against the unit body
wThe seal must have a firm fit at the upper corner on the handle side. To check, darken the room, place a torch inside the appliance at the top and close the door. If light shines through, check the installation.
2.4 Connecting the appliance
NOTICE
Risk of damage to the electronic control system!
u Do not use
WARNING
Fire and overheating hazard!
u Do not use extension cables or multiple socket outlets.
The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see Appliance at a glance).
Connect the appliance only with a properly installed socket outlet with earthing contact. The socket outlet must be fused with 10 A or higher.
It must be easily accessible so that the appliance can be quickly disconnected from the supply in an emer- gency. It must be outside the area of the rear of the appliance.
u Check the electrical connection. u Plug in the power plug.
8
