Liebherr 211111 7085270 - 00 Putting into operation, Changing over door hinges

Putting into operation

If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance.

u Always see to good ventilation at the installation site.

2.2 Changing over door hinges

NOTICE

Risk of damage by condensate to appliances installed side-by- side!

If refrigerator and freezer are installed side-by-side, the freezer always has to be to the right of the refrigerator, as seen from the front.

u Do not change over the door hinges.

Ensure that the following tools are to hand: q Cordless screwdriver Torx® 15, 25

q Screwdriver Torx® 15, 25

Slide the appliance 2/3 of the way into the recess. Pull out the power plug.

Open the door.

2.2.1 Detach the soft stop mechanism*

Fig. 1

CAUTION

Risk of injury if soft stop contracts! u Detach with care.

u Pushtension spring Fig. 1 (11) outwards, using a screw- driver.

u Lowersoft stop mechanism Fig. 1 (2) for removal. u Unscrewholder Fig. 1 (1).

u Unscrew the ball stud Fig. 1 (3) (Torx® 25).

2.2.2 Demount door

Fig. 2

uLift off covers Fig. 2 (1).

uOnly slacken fastening screws Fig. 2 (2).

uRemove door: push outwards, unhinge and set aside.

2.2.3 Change freezer compartment door*

Fig. 3

uFold away the cover of the turn hinge Fig. 3 (3).

uUnscrew turn hinge Fig. 3 (3) together with compartment door.

uUnscrew closing element Fig. 3 (4).

uClose the vacated holes with the accompanying stoppers Fig. 3 (5).

Fig. 4

uFit the closing element Fig. 4 (4).

uFit the compartment door at the top.

uFit the turn hinge Fig. 4 (3) and fold the cover.

2.2.4Changing bearing parts

CAUTION

Risk of injury if hinges fold! u Leave hinges open.

3