Liebherr 211111 7085270 - 00 Attach the unit door to the adjusting bolts 13

Putting into operation

Fig. 18 u Attach the unit door to the adjusting bolts Fig. 18 (13) and

loosely screw the locknuts Fig. 18 (10) onto them. u Close the door.

u Check the gap between the door and the surrounding unit doors.

u To laterally align the door: push unit door in X direction.

u Align the door vertically Y and in the lateral inclination: adjust adjusting bolts Fig. 18 (13) with a screwdriver.

w The unit door is flush and in alignment with the surrounding unit fronts.

u Tighten locknuts Fig. 18 (10).

Fig. 19

uDrill pilot holes in the door of the unit (possibly make prelimi- nary hole with a bradawl).

uScrew the appliance door to the unit door with screws Fig. 19 (19) passed through the mounting brackets Fig. 19 (22).

Fig. 20 u Adjust the depth of the unit door (Z): Undo the screws Fig. 20 (15) at the top and screws Fig. 21 (24) at the bottom,

then move the door.

u Do not allow knobs and sealing lips to make contact - important for func- tion!

u Allow an air gap of approx. 2 mm between the unit door and the body of the unit.

Fig. 21

uCheck the fit of the door and readjust if necessary.

uTighten all screws.

uTighten the locknuts Fig. 21 (10) with the ring spanner Fig. 21 (21), while holding the adjusting bolts Fig. 21 (13) with a screwdriver.

uAttach top cover

Fig. 22 (26) and snap into place.

Fig. 22

7