A
Upgrade mpx100 with data migration firmware:
k. Unpack the image by typing the image unpack command. Enter yes when prompted to reboot.
mpx100 (admin) #> image unpack mpx100-2_4_1_0dmrc12g.bin
Unpack Completed. A reboot is required for the FW to take affect.
Do you wish to reboot the System at the current time (y/n): y
System will now be rebooted...
l.When the mpx100 is finished rebooting, verify that the new firmware loaded successfully by typing the show system command.
mpx100 #> show system |
|
System Information |
|
| |
Product Name | HP StorageWorks mpx100 |
Symbolic Name |
|
Embed Symbolic Name | Disabled |
System Mode | iSCSI Server Connectivity |
Controller Lun AutoMap | Enabled |
Serial Number | MXK821C011 |
HW Version | 6 (IPv6 Supported) |
SW Version | 2.4.1.0dmrc12g |
No. of FC Ports | 2 |
No. of iSCSI Ports | 2 |
Log Level | 0 |
Log Length (KB) | 32768 |
Temperature (C) | 38 |
| 5 |
