Section 3 - Radio Setup Menu (RADIO SETUP)

3-1 Radio Setup Menu (RADIO SETUP)

The following options are available through MENU key:

UIC

CH NAME

RING VOLUME

KEY BEEP

INT SPEAKER

WATCH MODE

WX ALERT

COM PORT

Channel band.

See Section 3-2.

Edit or delete channel names. See Section 3-3.

Set the volume level of the incoming call notification beeps. See section 3-4.

Set the volume level of the beeps. See section 3-4.

Switch ON/OFF (on/off ) the radio’s internal speakers. See section 3-5.

Selects the operation of Dual or Tri watch scanning. See section 3-6.

Selects if the WX Alert scanning mode is ON (on) or OFF (off ). LVR-250 US only. See section 3-7.

Select NMEA protocol for communications between the VHF radio and any other instruments. See section 3-8.

Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data.

3-2 Channel (UIC)

Toggle between USA, International or Canadian channel banks. The selected channel bank is displayed on the LCD along with the last used channel. All the channel charts are shown in Appendix C.

RADIO SETUP >UIC

CH NAME RING VOLUME

UIC >USA INT’L

CANADA

Lowrance - LVR-250 Installation and Operation Instructions

27

Page 27
Image 27
Lowrance electronic LVR-250 manual Radio Setup Menu Radio Setup, Channel UIC, Radio Setup UIC, UIC USA INT’L Canada