Lowrance electronic LVR-250 DSC Setup Menu DSC Setup, DSC Setup Menu Options, Input User Mmsi

USER MMSI GROUP SETUP INDIV REPLY ATIS MMSI ATIS FUNC DSC FUNC LL REPLY

Section 4 - DSC Setup Menu (DSC SETUP)

WARNING

A valid USER MMSI must be entered into this radio before these DSC functions can be used. See below for instruction to Enter Your USER MMSI.

4-1 DSC Setup - Menu Options

The following options are available through MENU key:

Enter your user MMSI. See section 4-2.(If you do not have a user MMSI, see Appendix D.)

Enter or change the name and/or details of a group. See section 4-3.

Choose an automatic or manual response to calls. (LVR-250 US only) See section 4-4.

Enter or change your ATIS MMSI (LVR-250 EU only) See section 4-5.

Enable/disable the ATIS function (LVR-250 EU only) See section 4-5.

Turn the DSC operation ON/OFF (on/off ). See section 4-6.

Select the type of response to an LL polling request. See section 4-7.

Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data.

4-2 Enter Your USER MMSI (USER MMSI)

This is a once-only operation. You must enter your user MMSI before you can access the DSC functions.

DSC SETUP

>USER MMSI GROUP SETUP INDIV REPLY

INPUT USER MMSI

–––––––––

USER MMSI 187654321 >STORE CANCEL

USER MMSI INPUT AGAIN

–––––––––

You can display and read your user MMSI at any time, but you get only one opportunity to enter your user MMSI.

1.Select DSC SETUP, then USER MMSI.

2.If this is the first time that you are entering your user MMSI, a dashed line appears.

Enter your user MMSI along the dashed line. Press ENT to confirm each correct entry and to move to the next digit. If you make an error, press - until < appears, then press ENT to backup and correct the entry.

30 Lowrance - LVR-250 Installation and Operation Instructions