Xerox DocuColor 40CP manual Setting up PostScript printing with Windows

2 Installing User Software on a Windows Computer

Downloading printer files with the Installer WebTool

Installers for the DocuColor 40 CP printer files can be downloaded from the DocuColor 40 CP with the Installer WebTool (if the site administrator has enabled Internet access to the DocuColor 40 CP). For instructions, see “Using the Installer WebTool” on page 58.

Once you download the installers, the installation process is identical to installing from the User Software CD.

Setting up the DocuColor 40 CP as a PostScript printer

To set up the DocuColor 40 CP as a PostScript printer, you need a PostScript printer driver and the appropriate DocuColor 40 CP PPD file.

Install the appropriate Adobe PostScript printer driver, included with the DocuColor 40 CP user software. All drivers are capable of providing access to all DocuColor 40 CP features; in addition, the Adobe PostScript printer drivers for Windows 95 and Windows NT 4.0 supports PostScript 3.

The following procedures are specific to each version of Windows.

Setting up PostScript printing with Windows 95

You can use the following procedure whether you are installing from the User Software CD or with installer files downloaded using the Installer WebTool.

NOTE: If you have problems setting up the DocuColor 40 CP, install another PostScript printer such as the Apple LaserWriter, and then install the DocuColor 40 CP.

TO INSTALL THE ADOBE POSTSCRIPT PRINTER DRIVER FOR WINDOWS 95:

1.If you are installing from the CD, insert it into the CD-ROM drive, double-click the icon of the CD, and open the English\Instalrs\Ps_drvr folders.

If you are installing from the files you downloaded using the Installer WebTool, double-click the icon of your hard disk drive, and open the Prntdrv\Ps_drvr folders.

2.Open the Win_95 folder, and double-click the Setup.exe icon.