Xerox DocuColor 40CP manual print hold

29Setting up the DocuColor 40 CP as a PostScript printer

4.Enter the IP address of the DocuColor 40 CP.

If your network uses Domain Name Services (DNS), enter the DNS name assigned to the DocuColor 40 CP instead of the IP address.

5.Press Tab and type the internal name of the DocuColor 40 CP.

This name can be simply the print queue name or it can be of the form queue_devicename. The name must be one of the following:

print hold

print_DocuColor hold_DocuColor

NOTE: This name is case-sensitive; type it exactly as shown above.

6.Click OK.

The workstation checks the address or DNS name you entered and notifies you if it cannot resolve the address.

7.Click Close in the Printer Ports dialog box.

The new port configuration is reflected in the Ports tab. You should now print a test page to verify the connection.

8.Click the General tab and click Print Test Page.

When you print, your PostScript files are transmitted over the LPR Port connection to the DocuColor 40 CP.

9.Click OK to close the Printer Properties dialog box.