Lowrance electronic LVR-250 manual 2-6GPS Simulator SIMULATOR, 2-7Reset to Factory Defaults RESET

Models: LVR-250

1 64
Download 64 pages 42.77 Kb
Page 26
Image 26
2-5-7 GPS Alert Options (ALERT)

2-5-7 GPS Alert Options (ALERT)

The GPS alert is usually set to ON (on) so that if the GPS navigation receiver is disconnected,

the alarm sounds.

SETTING

LLDISPLY COG/SOG

>GPS ALERT

GPS ALERT >ON

OFF

1.Select GPS/DATA, then SETTING.

2.Select GPS ALERT.

3.Select ON (on) or OFF (off ) as desired.

2-6 GPS Simulator (SIMULATOR)

The GPS Simulator is set to OFF whenever the radio is turned ON or whenever real GPS data is available through the COM port. However, if you want to test it, turn it on.

MENU SELECT DSC SETUP RADIO SETUP >GPS SIM

1.Select GPS SIM, then select ON (on) or OFF (off ) as desired.

Whenever the GPS Simulator is turned ON (on), simulated Speed Over Ground (SOG), Course Over Ground (COG), and LL position appear on the screen. This data is updated automati- cally during the simulation.

It is not possible to send a DSC transmission when in Simulator mode.

2-7 Reset to Factory Defaults (RESET)

Use this to return every setting to the factory defaults except all MMSI settings and the entries in your buddy list.

MENU SELECT RADIO SETUP GPS SIM >RESET

RESET RADIO ARE YOU SURE >YES

NO

1.Select RESET. The radio asks for confirmation.

2.Select YES to reset the radio and return to the menu.

26

Lowrance - LVR-250 Installation and Operation Instructions

Page 26
Image 26
Lowrance electronic LVR-250 2-6GPS Simulator SIMULATOR, 2-7Reset to Factory Defaults RESET, 2-5-7GPS Alert Options ALERT