Lowrance electronic LVR-250 manual 5-2-8Call using the Distress Log DIST LOG

5-2-8 Call using the Distress Log (DIST LOG)

DSC CALL ALL SHIPS CALL LOG >DIST LOG

REBECCA T >CALL BACK DELETE RELAY

DISTRESS

12:15 UTC 82º50.1234 N 24º45.3425 W

REBECCA T

INDIVIDUAL ROUTINE >SET CHANNEL

Alternating

REBECCA T INDIVIDUAL ROUTINE >SEND?

02 REBECCA T DISTRESS PIRACY

ALL RELAY

The Distress Log contains the Distress Log data for the 10 most recent relayed Distress Calls, so that you can call any of them quickly. Always try to make voice contact on CH16 first, as follows:

1.Press CALL to enter DSC mode, then select DIST LOG.

2.The most recently received Distress Call Is the first entry (01) in the Distress Log. Select the entry that you want to call and press ENT.

The details are displayed over two screens that alternate every 1.5 seconds; the first screen shows the location and name or MMSI of the vessel in Distress, the second screen shows the nature of the emergency (if specified) and the MMSI of the vessel that relayed the Distress Call.

3.Select CALL BACK and press ENT, then set the channel and continue as explained in Section 5-2-1.

5-2-9 Call distress relay using the Distress Log (DIST LOG)

5-2-9-1 Call distress relay to individual using the Distress Log

You can make a distress relay to an individual in the log.

DSC CALL ALL SHIPS CALL LOG >DIST LOG

SAM

>CALL BACK DELETE RELAY

02SAM DISTRESS FLOODING

RELAY >INDIV RELAY ALL RELAY

Alternating

INDIV RELAY >MANUAL NEW SAM

BOBY

DISTRESS

12:05 UTC 82º50.003 N 27º45.543 W

1.Press CALL to enter DSC mode, then select DIST LOG.

2.Select the entry that you want to call and press ENT. The details are displayed over two screens that alternate every 1.5 seconds; the first screen shows the location and name or MMSI of the vessel in Distress, the second screen shows the nature of the emergency (if specified) and the MMSI of the vessel that relayed the Distress Call.

Lowrance - LVR-250 Installation and Operation Instructions 39