4-5-1 Enter or Edit YOUR ATIS MMSI
DSC SETUP GROUP SETUP INDIV REPLY
>ATIS MMSI
ATIS MMSI 923456789
>STORE CANCEL
INPUT ATIS | INPUT ATIS | INPUT AGAIN |
MMSI | MMSI | ATIS MMSI |
> STORE | ||
| CANCEL |
|
An ATIS MMSI always starts with the number 9. To enter or edit your ATIS MMSI:
1.Select DSC SETUP, the ATIS MMSI.
2.If this is the first time that you are entering your ATIS MMSI, a dashed line appears. Enter your ATIS MMSI along the dashed line. The first number is always 9. Press ENT to confirm each correct entry and to move to the next digit.
If you make an error, press - until < appears, the press ENT to backup and correct the entry. If you are editing an existing ATIS MMSI, this will be displayed. Make the required changes.
3.Press ENT to store your user MMSI.
4.Enter your ATIS MMSI again as a password check, then press ENT to permanently store the ATIS MMSI and return to the menu.
You can view your stored ATIS MMSI at anytime by selecting ATIS MMSI in the main menu
4-5-2 Enable ATIS Functionality (ATIS FUNC) LVR-250 EU ONLY
ATIS functionality will operate only after the ATIS MMSI has been entered (see previous sec-
tion).
DSC SETUP |
| ATIS FUNC |
INDIV REPLY |
| >ON |
ATIS MMSI |
| OFF |
>ATIS FUNC |
|
|
|
|
|
1.Select DSC SETUP, then ATIS FUNC.
ATIS
2.Select ON (on) to enable the ATIS functionality and automatically disable DSC functionality. The ATIS annunciator appears on the screen.
It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. When you enable one, the other will turn OFF (off ). If DSC and ATIS are both OFF (off ), DSC will have to be switched ON (on) for normal DSC operation.
There are two annunciators in the screen to show you the current mode: if the DSC annuncia- tor is shown, DSC is operational, if the ATIS annunciator is shown, ATIS is operational.
Lowrance - | 33 |
