Lowrance electronic LVR-250 manual Checklist

Checklist

The following items should be supplied in the box. Check before starting the installation and contact your dealer if an item is missing.

Note: An antenna is not provided. Consult your Lowrance dealer for advice if necessary.

1.Mounting gimbal for the VHF radio

2.Power supply cable with in built 7 Amp fuse

3.External speaker connection cable with white (+) wire and black (-) wire

4.GPS connection cable

5.Two mounting knobs

6.Microphone bulkhead mount

7.Four self-tapping screws for the mounting gimbal

8.Four flat screws for the mounting gimbal

9.Four spring washers for the mounting gimbal

12.Two self-tapping screws for the microphone bulkhead mount

13.Two flat screws for the microphone bulkhead mount

14.Two spring washers for the microphone bulkhead mount

15.Two plain washers for the microphone bulkhead mount

16.Two nuts for the microphone bulkhead mount

17.Four M5x32 screws for recessed installation

18.Four nuts for the recessed installation

Not pictured: Two plastic stoppers for the recessed installation. Installation template.

10.Four plain washers for the mounting gimbal

11.Four nuts for the mounting gimbal

One 7 Amp spare fuse in case of accidental reverse of battery polarity. Base unit and microphone. Protective cover.

1

2

3

4

5	7
6	8
	9
	10
	11

17		12
	18	13
		14
		15
		16

Lowrance - LVR-250 Installation and Operation Instructions 7