Preparation
Setting the Date/Time (Clock Set)
7
1,6 | 2,3,4,5 |
3
REC 
SETUP 2/3
BEEP
NO.RESET
RESET
CLOCK SET 
SELECT
SET
EXIT MENU
4,5
CLOCK SET
10:00 NOV. 1. 2003 
M/D/Y
SELECT
SET
EXIT MENU
If the message [PLEASE SET THE CLOCK] appears, set the date and time.
You can go to the setup menu by pressing the [MENU] button while the message is displayed.
You can set the year from 2003 to 2099. The
1Press the [MENU] button.
2Press 1 to make the setup menu appear.
•In simple mode, skip this step.
3Press 3/4 to select [CLOCK SET], and then press 1.
4Press 3/4/2/1 to set date and time, and then press 1.
5Press 3/4 to select [M/D/Y], [D/M/Y] or [Y/M/D].
6Press the [MENU] button 2 times.
•The menu will disappear.
7Check if the date/time setting is displayed correctly, after turning the camera [OFF] and [ON].
•When the new batteries are inserted in the camera for more than 3 hours, the time and date will be held for approximately 3 months if the battery is removed. If the batteries were not new, the time may not be retained properly. If the time/date setting is lost please reset it.
25
