Preparation
Charging the Batteries
1Insert batteries into the charger.
2Insert the charger into the electrical
outlet.
• The charge lamp A lights and charge starts.
3 Charge is completed when the charge lamp is no longer illuminated.
• Confirm that batteries are inserted properly.
• Disconnect the charger from the electrical outlet after the charging is completed.
ªEnvironment/charge error
•Charge in a place with a surrounding temperature of 32 - 104 F (0 - 40 oC) (also temperature of the battery).
•When charging starts, the charge lamp lights.
If after charging starts the charge lamp blinks, it indicates a charge error.
In this case, remove the charger from the electrical outlet, take out batteries, check whether the surrounding temperature or the batteries are too hot or cold, and charge again. An error cannot be cancelled by turning the power off/on. If after charging again the charge lamp still blinks, consult your nearest servicenter.
•Use Panasonic AA
11
