Panasonic DMC-LC43PP Message Indications, No Memory Card This Picture is Protected

	Others
Message Indications
[NO MEMORY CARD]	[THIS PICTURE IS PROTECTED]
Insert the Memory Card.	After cancelling the protect setting, you
	can delete or overwrite the image.

[THIS MEMORY CARD IS PROTECTED]

Cancel the Memory Card lock.

[NO VALID IMAGE TO PLAY]

Carry out playback after recording or after inserting the Memory Card with a recorded image.

[THIS PICTURE CAN’T BE DELETED]/[SOME PICTURES CAN’T BE DELETED]

If the image is not based on the DCF standard, it is not possible to delete selected pictures.

[MEMORY CARD FULL]/[NOT	[NO ADDITIONAL DELETE
	SELECTIONS CAN BE MADE]
ENOUGH MEMORY IN THE CARD]	You have exceeded the number of
Insert a new Memory Card or delete	images that can be set at once with
unnecessary data.	multi-deleting setting.

[MEMORY CARD ERROR]

Failed access to Memory Card. Insert the card again.

[READ ERROR]

Data reading error.

Play it back again.

[WRITE ERROR]

Data writing error.

Turn the camera [OFF] and remove the card. Then insert the card and turn the camera back [ON]. Be sure camera is [OFF] before removing or inserting the card to avoid damaging the card.

[SYSTEM ERROR]

When the camera does not work correctly because of the pressure to the lens, this message is displayed. Turn the power switch to [ON] again.

[CAN’T BE SET ON THIS PICTURE]/[CAN’T BE SET ON SOME PICTURES]

If the image is not based on the DCF standard, it is not possible to set the DPOF or audio dubbing.

[MEMORY CARD ERROR FORMAT THIS CARD?]

The format of this card cannot be recognized by the camera. Format the card again with the camera.

[MODE DIAL IS NOT IN THE PROPER POSITION]

This message is displayed when you turn on the camera with the mode dial in the wrong position.

Rotate the mode dial to the proper position.

[PLEASE SET THE CLOCK]

This message is displayed when you use the camera for the first time or you do not use the camera for a long time. Set the clock again.

92