Preparation
Turning Power on/off
1,21
OFF
ON 2
Set the power switch to [ON].
•The Status indicator 1 lights.
Set the power switch to [OFF].
•When the power switch is turned on, do not hold the lens cover. If the lens cover does not open, [SYSTEM ERROR] is displayed. Turn the power switch off and on.
•Do not apply pressure to the lens when the lens tube comes out.
ªStatus Indicator A
Lights:
A• When turning the Power switch to [ON].
Blinks:
• While the focus is being adjusted or the focus is not properly adjusted.
B• When the card is not inserted.
•When no space is left on the card.
•When the remaining battery power is low. (blinks slowly)
ªFlash/Access Indicator B
Lights:
•When accessing the card.
•When the flash fires. (It lights when the shutter is pressed halfway)
•When sending data to PC.
Blinks:
•When charging the flash.
•When setting the flash mode to forced off and recording in dark places. (blinks slowly)
19
