Recording images (advanced)
Taking Pictures using Burst Mode
By continuously pressing the shutter button, it is possible to record in burst mode.
2 | Burst | Number of recordable | ||
|
| |||
|
| speed | pictures |
|
| H | 4 frames/ | 5 frames | 7 frames |
| second |
|
| |
|
|
|
| |
| L | 2 frames/ | 5 frames | 7 frames |
| second |
|
| |
|
|
|
| |
[Preparation]
•Set the mode dial except for [
]/[
]. (P23)
1Press [ 
].
•Every time you press it, what is displayed changes as shown below.
H | L | OFF |
|
|
H: High speed
L : Low speed
When these indicators are not displayed, burst mode is cancelled.
2Press the shutter button halfway to lock the focus, then press it fully to take pictures in sequence.
•It is possible to record 4 frames in 1 second in burst mode, at a shutter speed higher than 1/60, but the flash does not fire simultaneously.
•If the flash fires, it is possible to record only 1 frame.
•In simple mode [
], the shutter speed is fixed to the low speed. (P28)
•You cannot take still pictures with audio in the burst mode.
•Burst mode will not perform as described if a MultiMediaCard is used in place of SD Memory Card. The reading/writing speed of a MultiMediaCard is slower than an SD Memory Card.
52
