Removing the base grille
To remove the grille:
1.Open both doors.
2.Pull base grille forward to release the support tabs from the metal clips.
3.Do not remove Tech Sheet fastened behind the grille.
To replace the grille:
1.Line up grille support tabs with metal clips.
2.Push firmly to snap into place.
3.Close the doors.
See cleaning instructions for defrost pan and condenser coils on page 23.
Condenser coils 7
Using the THIRSTCRUSHER” dispensing system
(on some models)
The ice dispenser
Ice dispenses from the ice maker storage bin in the freezer. When the dispenser bar is pressed, a trapdoor opens in a chute between the dispenser and the ice bin. Ice moves from the bin and falls through the chute. When the dispenser bar is released, a buzzing sound may be heard for a few seconds as the trapdoor closes. The dispenser system will not operate when the freezer door is open.
For crushed ice, cubes are crushed before being dispensed. This may cause a slight delay when dispensing crushed ice. Noise from the ice crusher is normal, and pieces of ice may vary in size.
When changing from CRUSHED to CUBED, a few ounces of crushed ice will be dispensed along with the first cubes.
Personal Injury Hazard
Tumbling ice and pressure on a fragile glass can break it. Use a sturdy glass when dispensing ice or water.
Failure to do so could result in personal injury or breakage.
To dispense ice:
1.For cubed ice, move Ice Selector Switch to CUBED position.
For crushed ice (on some models), move Ice Selector Switch to CRUSHED position.
17
