Removing the Doors Please read these helpful hints before
you start
l Before you start, either unplug the
refrigerator or disconnect the electricity
leading to it at the main power supply
and remove any food from door
shelves.
Cabinet
l When removing hinges, keep doors
closed until ready to lift free from
cabinet.
l To remove doors, start at the top hinge
and work down.
l To replace doors, start at the bottom
hinge and work up.
l Line up doors so they are centered
between the sides of the cabinet and
are parallel with each other.
l If refrigerator light does not go out
when door is closed, the door may be
too low. Use a thicker spacer if
necessary.
l Door seal may be adjusted by removing
the top hinge and adding or removing
shims to the bottom hinge.
l Set the door gap at 17.5 mm (l% inch).
The diameter of a dime is about right.
See figure.
l The refrigerator must be level and
sitting on a solid floor.
8
mm (YE”) Countersink Oval sealing Handle
hex-head handle screw Oval sealing
hinge screw screw (use on bot- screw screw (use
toms of doors) on tops of
doors)
27