Using the ice cube trays
(on some models)
If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer you store cubes, the smaller they get.
To remove ice:
1.Hold tray at both ends.
2.Twist slightly.
Using the optional automatic ice maker
If your refrigerator has an automatic ice maker, or if you plan to add one later (contact the dealer for ice maker kit number), here are a few things you should know.
l The ON/OFF lever is a wire signal arm. DOWN to make ice automatically
UP to shut off the ice maker
UP to stop ice maker.
IMPORTANT: Do not turn ice maker on until you connect it to the water
supply.
lIf you remove the ice bin, raise the signal arm to shut off the ice maker. When you replace the bin, push it in all the way and lower the ice maker signal arm to the ON position.
l Good water quality is important for good ice quality. Try to avoid connect- ing the ice maker to a softened water supply. Water softener chemicals (such as salt from a malfunctioning softener) can damage the ice maker mold and lead to poor ice quality. If you cannot avoid a softened water supply, make sure the water softener is operating properly and is well maintained.
DOWN to start ice maker.
16
