Lexmark 279 manual Copying photos, Copying on specialty media, Copying using the scanner glass

Copying 56

•The ADF indicator light comes on when the paper is loaded properly.

2Adjust the paper guides.

3From the printer control panel, use the keypad to enter the number of copies, and then press .

Copying using the scanner glass

1Place an original document facedown on the scanner glass in the upper left corner.

2From the printer control panel, use the keypad to enter the number of copies, and then press .

Note: If you want to scan another document, then place the next document on the scanner glass, press the left

or right arrow button to scroll to Scan the Next Page, and then press .

3Press the left or right arrow button to scroll to Finish the Job, and then press .

Copying photos

1Place a photo facedown on the scanner glass in the upper left corner.

2From the printer control panel, navigate to:

> Copy > > Content Type > Photo

3From the Content Source menu, choose a setting that best describes the original photo your are copying, and then

press .

Note: If you want to copy another photo, then place it on the scanner glass, press the left or right arrow button

to scroll to Scan the Next Page, and then press .

4Press the left or right arrow button to scroll to Finish the Job, and then press .

Copying on specialty media

Copying on transparencies

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.