Lexmark 279 manual Placing information on copies, Copying multiple pages onto a single sheet

Copying 62

3From the printer control panel, navigate to:

> Copy > > Separator Sheets

4Select Between Copies, Between Jobs, Between Pages, or Off.

5Select the number of copies or enter a number on the keypad, and then press .

Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow

button to scroll to Scan the Next Page, and then press .

6Press the left or right arrow button to scroll to Finish the Job, and then press .

Copying multiple pages onto a single sheet

To save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper.

Notes:

•Make sure the paper size is set to letter, legal, A4, or JIS B5.

•The copy size must be set to 100%.

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

3From the printer control panel, navigate to:

> Copy > > Paper Saver > select the setting that you want

4Select Off, 2‑up Portrait, 2‑up Landscape, 4‑up Portrait, or 4‑up Landscape.

5Select the number of copies or enter a number on the keypad, and then press .

Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow

button to scroll to Scan the Next Page, and then press .

6Press the left or right arrow button to scroll to Finish the Job, and then press .

Placing information on copies

Placing an overlay message on each page

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.