Lexmark 279 manual ‑page jam, open front door y.xx, Clearing jams 166

Clearing jams				166
		Jam access area	Printer control panel message	What to do
	1	Automatic document	[x]‑page jam, open automatic	Remove all paper from the ADF tray, and then remove
		feeder (ADF)	feeder top cover. [28y.xx]	the jammed paper.
	2	Standard bin	[x]‑page jam, clear standard	Remove the jammed paper.
			bin. [20y.xx]
	3	Front door	[x]‑page jam, open front	Open the front door, then remove the toner cartridge
			door. [20y.xx]	and imaging unit, and then the jammed paper.
	4	Multipurpose feeder	[x]‑page jam, clear manual	Remove all paper from the multipurpose feeder, and
			feeder. [250.xx]	then remove the jammed paper.
	5	Tray 1	[x]‑page jam, remove tray 1 to	Pull out tray 1 completely, then push the front duplex
			clear duplex. [23y.xx]	flap down, and then remove the jammed paper.
				Note: You may need to open the rear door to clear
				some 23y.xx paper jams.
	6	Tray [x]	[x]‑page jam, remove tray	Pull out the indicated tray, and then remove the jammed
			[x]. [24y.xx]	paper.
7		Rear door	[x]‑page jam, open rear	Open the rear door, and then remove the jammed paper.
			door. [20y.xx]

[x]‑page jam, open front door. [20y.xx]

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

1Press the button on the right side of the printer, and then open the front door.