Lexmark 279 manual XPS menu, PCL Emul menu, Understanding the printer menus 137

Understanding the printer menus 137

XPS menu

Use	To
Print Error Pages	Print a page containing information on errors, including XML markup errors.
Off	Note: Off is the factory default setting.
On

PDF menu

Use	To
Scale to Fit	Scale page content to fit the selected paper size.
Yes	Note: No is the factory default setting.
No
Annotations	Print annotations in a PDF.
Do Not Print	Note: Do Not Print is the factory default setting.
Print

PCL Emul menu

Use	To
Font Source	Specify the set of fonts used in the Font Name menu.
Resident	Notes:
Download
	• “Resident” is the factory default setting. It shows the factory default set
All
	of fonts downloaded in the RAM.
	• “Download” shows all the fonts downloaded in the RAM.
	• “All” shows all fonts available to any option.
Font Name	Identify a specific font and where it is stored.
Courier 10	Note: Courier 10 is the factory default setting.
Symbol Set	Specify the symbol set for each font name.
10U PC‑8	Notes:
12U PC‑850	• 10U PC‑8 is the U.S. factory default setting. 12U PC‑850 is the
	international factory default setting.
	• A symbol set is a set of alphabetical and numeric characters, punctuation,
	and special symbols. Symbol sets support the different languages or
	specific programs, such as math symbols for scientific text. Only the
	supported symbol sets are shown.
PCL Emulation Settings	Change the point size for scalable typographic fonts.
Point Size	Notes:
1.00–1008.00
	• 12 is the factory default setting.
	• Point size refers to the height of the characters in the font. One point
	equals approximately 0.014 of an inch. This can be increased or decreased
	in 0.25‑point increments.