Lexmark 279 manual Print Settings, Setup menu, Finishing menu, Understanding the printer menus 133

Understanding the printer menus 133

Print Settings

Setup menu

Use	To
Printer Language	Set the default printer language.
PCL Emulation	Notes:
PS Emulation
	• PCL Emulation is the factory default printer language.
	• Setting a printer language as the default does not prevent a
	software program from sending print jobs that use another
	printer language.
Print Area	Set the logical and physical printable area.
Normal	Note: Normal is the factory default setting. When attempting to
Whole Page	print data in the non‑printable area defined by the Normal
	setting, the printer clips the image at the boundary.
Resource Save	Specify how the printer handles temporary downloads, such as
On	fonts and macros stored in the RAM, when the printer receives a
Off	job that requires more memory than is available.
	Notes:
	• Off is the factory default setting. This sets the printer to
	retain the downloads only until memory is needed.
	Downloads are deleted in order to process print jobs.
	• On retains the downloads during language changes and
	printer resets. If the printer runs out of memory, then
	Memory Full [38] appears, and downloads are not
	deleted.

Finishing menu

Use	To
Sides (Duplex)	Specify whether two‑sided (duplex) printing is set as the user default setting for all
1 sided	print jobs.
2 sided	Notes:
	• “1 sided” is the factory default setting.
	• You can set two‑sided printing from the software program.
	For Windows users:
	Click File > Print, and then click Properties, Preferences, Options, or Setup.
	For Macintosh users:
	Choose File > Print, and then adjust the settings from the print dialog and
	pop‑up menus.