Lexmark 279 manual Fax Settings menu, Fax Mode Analog Fax Setup menu, General Fax Settings

Understanding the printer menus		119
	Use	To
	Adjust ADF Skew	Correct slight skew in the scanned image.
	Auto	Note: Auto is the factory default setting.
	Off
	On
	Scan edge to edge	Specify if the original document is scanned edge‑to‑edge.
	Off	Note: Off is the factory default setting.
	On
	Sharpness	Adjust the amount of sharpness of a copy.
	1–5	Note: 3 is the factory default setting.

Fax Settings menu

Fax Mode (Analog Fax Setup) menu

Analog Fax Setup mode sends the fax job through a telephone line.

General Fax Settings

Use	To
Fax Name	Specify the name of the fax in the printer.
Fax Number	Specify the number assigned to the fax.
Fax ID	Specify how the fax is identified.
Fax Name	Note: Fax Number is the factory default setting.
Fax Number
Enable Manual Fax	Set the printer to fax manually, which requires a line splitter and a telephone handset.
On	Notes:
Off
	• Off is the factory default setting.
	• Use a regular telephone to answer an incoming fax job and to dial a fax
	number.
	• Press # 0 on the numeric keypad to go directly to the Manual Fax function.
Memory Use	Define the allocation of non-volatile memory between sending and receiving fax jobs.
All receive	Notes:
Mostly receive
	• Equal is the factory default setting. This splits the memory for sending and
Equal
	receiving fax jobs into equal amounts.
Mostly send
	• Mostly send specifies that most of the memory is set to send fax jobs.
All send
	• All send specifies that all the memory is set to send fax jobs.
	• All receive specifies that all the memory is set to receive fax jobs.
	• Mostly receive specifies that most of the memory is set to receive fax jobs.
Cancel Faxes	Specify whether the printer cancels fax jobs.
Allow	Note: Allow is the factory default setting.
Don't Allow