Lexmark 279 AppleTalk menu, Smtp Setup menu, To access the menu, navigate to any of the following

Understanding the printer menus	108
Use	To
View Security Mode	View the encryption method for the wireless network.

AppleTalk menu

Note: This menu is available only in printer models connected to a wired network or when an optional network card is installed.

To access the menu, navigate to any of the following:

•Network/Ports > Standard Network > Standard Network Setup > AppleTalk

•Network/Ports > Network Setup [x] > AppleTalk

Use	To
Activate	Enable or disable AppleTalk support.
Yes	Note: Yes is the factory default setting.
No
View Name	Show the assigned AppleTalk name.
	Note: The name can be changed only from the Embedded Web Server.
View Address	Show the assigned AppleTalk address.
	Note: The address can be changed only from the Embedded Web Server.
Set Zone	Provide a list of AppleTalk zones available on the network.
[list of zones available on the network]	Note: The factory default setting is the default zone for the network. If no
	default zone exists, then the zone marked with an asterisk (*) is the default
	setting.

SMTP Setup menu

Use	To
Primary SMTP Gateway	Specify SMTP server gateway and port information.
	Note: 25 is the default SMTP gateway port.
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout	Specify the amount of time in seconds before the server stops trying to
5–30	send an e‑mail.
	Note: 30 seconds is the factory default setting.
Reply Address	Specify a reply address of up to 128 characters in the e-mail sent by the
	printer.