Lexmark 279 manual Understanding the printer menus 114, Error Recovery, Print Recovery

Understanding the printer menus		114
	Use	To
	Timeouts	Set the amount of time the printer waits to receive an end‑of‑job
	Print Timeout	message before canceling the rest of the print job.
	Disabled	Notes:
	1–255	• 90 seconds is the factory default setting.
		• When the timer expires, any partially printed page is printed,
		and then the printer checks to see if any new print jobs are
		waiting.
		• Print Timeout is available only when using PCL emulation.
	Timeouts	Set the amount of time the printer waits for additional data before
	Wait Timeout	canceling a print job.
	Disabled	Notes:
	15–65535	• 40 seconds is the factory default setting.
		• Wait Timeout is available only when the printer is using
		PostScript emulation.
	Error Recovery	Automatically reboot the printer.
	Auto Reboot	Note: Reboot always is the factory default setting.
	Reboot when idle
	Reboot always
	Reboot never
	Error Recovery	Determine the number of automatic reboots the printer can
	Max Auto Reboots	perform.
	1‑20	Notes:
		• 2 is the factory default setting.
		• If the printer reaches the maximum number of reboots
		within a certain amount of time, the printer does not
		continue to reboot, and the error message appears on the
		display.
	Print Recovery	Let the printer automatically continue printing from certain offline
	Auto Continue	situations when these are not resolved within the specified time
	Disabled	period.
	5–255	Note: Disabled is the factory default setting.
	Print Recovery	Specify whether the printer reprints jammed pages.
	Jam Recovery	Notes:
	On
		• Auto is the factory default setting. The printer reprints
	Off
		jammed pages unless the memory required to hold the
	Auto
		pages is needed for other printer tasks.
		• On sets the printer to always reprint jammed pages.
		• Off sets the printer to never reprint jammed pages.